Product model | UBX50-T18-DI-H5 |
Detection range | 50…500mm |
Non-detection zone | 0mm ..50mm |
Transducer frequency | About 380KHz |
response time | About 50ms |
Standard target version | 100mm*100mm |
type of output | DI: 4-20mA DU:0-10V |
Working voltage | DI:10-30V DC ripple 10% DU:15-30V DC ripple 10% |
Rated working current | ≤ 45mA |
Repetition accuracy of rated working | ±1.5% |
Range adjustment | Adjust the farthest and nearest range through the adjusting line |
Degree of protection | IP65 |
Connection mode | Connector plug M12 x 1, 5-pin/2m PVC cable |
LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status |
LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |