Specification: |
Product model | UCX200-GM30-DI-H5 |
Detection range | 70…1000mm |
Non-detection zone | 0mm ..70mm |
Transducer frequency | About 205KHZ |
response time | About125ms |
Standard target version | 100mm*100mm |
Type of output | DI: Passage /overload protection DU:0-10V |
Working voltage | DI:10-30V DC ripple 10% DU:15-30V DC ripple 10% |
Repetition accuracy of rated working | ≤ 0.1% |
Range adjustment | Adjust the farthest and nearest range through the adjusting line |
Degree of protection | IP65 |
Connection mode | Connector plug M12 x 1, 5-pin/2m PVC cable |
LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status |
LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |
Product model | UCX200-GM30-DI-H5 |